Torque Sensors
4502A
Shaft torque sensors Mini-Smart, torque transducers (measuring ranges 0.5 Nm to 1000 Nm) / 4502A
Main features / advantages
- Strain gauge torque transducers
- Analog output signal of 0 to 5 VDC, transferred without contact
- Integrated speed and angle measurement
- Connections: 1/4″ hex socket (DIN3126), square socket or cylindrical shaft ends
- Operational up to 12000 1/min
4503B
Shaft torque sensor, dual range torque transducer (measuring ranges from 0.2 Nm to 5000 Nm) / 4503B
Main features / advantages
- Dual range sensor with two separately calibrated torque measuring ranges
- Well suited for static and dynamic measurements with a cut-off frequency (–3 dB) 10 kHz
- Very high accuracy thanks to linearity error including hysteresis of only 0.05 %
- Operational up to 50000 1/min
4520A
Shaft torque sensors, basic line torque transducers (measuring ranges 1 to 1000 Nm) / 4520A
Main features / advantages
- Shaft torque transducers with integrated speed measurement
- Speed up to 10000 1/min
- Integral speed measurement with 60 pulses/revolution
- Well suited for static and dynamic measurements with a cut-off frequency (–3 dB) 1,5 kHz
- Analog output signal of ±0 … 10 VDC
4550A
Torque measuring flange system KiTorq Rotor, measuring ranges 100 to 10000 Nm / 4550A
Main features / advantages
- Torque transducers for high precision and reproducibility of torque, speed and angle measurement
- Analog and digital interfaces for maximum flexibility and easy integration
- Well suited for static and dynamic measurements with a cut-off frequency (–3 dB) 10 kHz
- Very high accuracy thanks to linearity error including hysteresis of only 0.03 %
- Rotational speed or angle measurement with up to 8192 pulses per revolution
93x9A
Reaction torque transducers, 1-axial, Mz up to ±1000 Nm (±737 ftlb) / 93x9A, suitable for non-rotating shafts
Main features / advantages
- Two calibrated measuring ranges: 100%, 10%
- Very compact, ready to install reaction torque sensor
- Flexible adaption with mounting threads in double flange
- Centering seats for coaxial mounting and optimum introduction of torque
- Centric bore for shaft passage
- Can be used as torque calibration sensor